conductor hardware

A false dead end is a structure that appears to be a dead end and allow some movement or flexibility in the line. It also provides a fixed termination point for the conductors a false dead end to absorb and accommodate certain dynamic forces. They also provide flexibility and allow for limited movement of the […]

A side tie refers to a type of hardware used to secure conductors to insulators to provide a reliable and stable connection. It may also refer to a conductor or set of conductors that connect two or more transmission lines at the side. Side ties help to prevent conductors from chafing against the insulator and

A spool tie is a hardware used to support and secure conductor wires to the transmission towers. They are also known as conductor ties or guy wire spool ties. A spool tie helps maintain the structural integrity of the transmission systems. They also hep prevent damages to the conductors and towers. A spool tie is

Slack span dead ends are specific arrangement used to terminate or anchor a section of the transmission lines. This is where the conductors are intentionally left with some slack or sag. This design helps them accommodate thermal expansion, reduce mechanical stresses and provide flexibility to the line. They are from materials that resist rust, corrosion

A line guard is a protective device used to maintain proper spacing and separation between conductors. A line guard also helps shed ice and snow in cold climates to reduce the risk of overload or damage to conductors. It also has deterrents such as spikes or barriers to discourage animals from nesting on the lines.

A false dead end is a structure or configuration that appears to be a dead-end. It is also known as a faux or pseudo dead ends. They help to prevent unauthorized personnel from attempting to climb the transmission tower. They also help maintain a consistent appearance along the transmission corridor. A false dead end is

A big grip dead end is a hardware used in the construction and termination of overhead transmission lines. it also serves as a mechanical termination point for overhead conductors. This helps to provide support and anchoring to the conductor at the end of a run. A big grip dead end is also responsible for supporting

Top ties are devices or methods used to secure and support conductors at the topmost point of a transmission tower or structure. Their purpose is to provide mechanical stability and ensure the conductors remain in place under various weather conditions. Top ties install at regular intervals along the span of the transmission lines. They are

A slack span dead end is a component used in overhead transmission lines. They provide mechanical support and termination for a section of conductor where there is a change in tension or direction. The slack dead end works in areas where there is a need for flexibility in the line. This is due to factors

A distribution grip dead end is a device used to support and secure the conductor wires that carry electrical power. They are mostly used in lower voltage lines that distribute electricity from substations to homes, businesses and other consumers. Distribution grip dead end is also known as suspension grip or dead-end grip. The distribution grip