A slack span dead end refers to a specific type of support and tensioning configuration used in transmission lines. It provides flexibility in the design and layout transmission lines. They also allow for minor adjustment in the line route. A slack span dead end installs at specific points often at the end of a span. […]
Slack Span Dead End: Specs & The Future Read More »
A slack span dead end terminates main, secondary, and even neutral cables. This helps to avoid the production of a standing wave on the transmission line, which could result in signal reflection. A slack span is a small length of conductor between two points when tension is low. It facilitates access to the conductor for
Terminate Lines: Slack Span Dead End Guide Read More »
A side tie refers to a specific method used to secure the conductor to the insulator that supports it on a pole. The side tie ensures the stability and safety of the transmission line by preventing the conductor from moving. It wraps around the conductor and insulator to provide lateral support to keep the conductor
Side Tie Mastery: Install, Maintain & Test Read More »
A side tie is a way of securing a conductor to an insulator on a utility pole. It wraps around the conductor and insulator to avoid slippage or displacement. A side tie maintains a firm grasp on transmission wires, ensuring their stability and safety. A side tie’s basic components are the conductor, insulator, and tie
Secure ADSS/OPGW with Side Tie:Don’t Let Your Cables Hang Read More »
A false dead end refers to a point where the transmission line appears to terminate or has support. It resembles a dead end but it’s not an actual end of the line. It is a specific type of termination or anchoring of a conductor in overhead power lines. A false dead end serves as an
False Dead End Future: Tech & Community Help Read More »
A false dead end is a support structure in which conductors anchor but continue on to the next support without finishing. It provides the illusion that the line does not extend beyond that point. This is to dissuade animals and humans from climbing. False dead ends give mechanical support to control the tension and weight of
False Dead End: Test, performance & Strength Read More »
A big grip dead end is a specialized device found in telecommunications and transmission lines. It helps to anchor and secure overhead cables. It comprises of a broad, robust grasp intended to hold the cable in place. Big grip dead end also helps to keep the cables from sagging or falling loose. A big grip dead
Unveiling Big Grip Dead End: ADSS/OPGW & Tech Specs Read More »
A thimble clevis is a component used for attaching insulators to the line conductor in overhead transmission lines. It also helps to connect the conductor to the insulator strings which support the conductors. It consists of a thimble-shaped metal component with a groove at one end to accommodate the conductor. The other end of the
Thimble Clevis Mastery: Install, Maintain & Choose the Right One Read More »
A spiral vibration damper is a device used to control aeolian vibrations in ADSS cables. ADSS cables are fiber optic cables designed for aerial installations. Aeolian vibrations can lead to fatigue and potential damage over time. These vibrations are from wind-induced oscillations and other environmental conditions. The dampers install along the length of the cable
Spiral Vibration Damper: Innovation in ADSS Protection Read More »
A span clamp is a hardware device used to secure and support electrical conductors between two points. It is also known as a suspension clamp or a mid-span clamp. Its purpose is to maintain the proper tension and spacing of conductors. This is conductors across spans between support structures. The clamps have designs to grip
Span Clamp Savvy: Mastering Accessories & Classification Read More »
